CNC Programmer Average Salary in Australia 2024
How much money does a person working as CNC Programmer make in Australia?
LOW
32,300
AUD AVERAGE
63,300
AUD HIGH
97,500
AUD
A person working as CNC Programmer in Australia typically earns around 63,300 AUD. Salaries range from 32,300 AUD (lowest) to 97,500 AUD (highest).
Salary Variance
This is the average salary including housing, transport, and other benefits. CNC Programmer salaries in Australia vary drastically based on experience, skills, gender, or location. Below you will find a detailed breakdown based on many different criteria.
CNC Programmer Pay Scale and Salaries in Australia
Salary Structure and Pay Scale Comparison
57,800 AUD or more
51,400 to 57,800 AUD
37,200 AUD or less
37,200 to 51,400 AUD
 32,300 AUD |
58,100 AUD |
97,500 AUD |
Median Salary, maximum and minimum salary, minimum wage, starting salary, and the salary range
Salary Range, Minimum Wage, and Starting Salary
Salaries for the position CNC Programmer in Australia range from 32,300 AUD (starting salary) to 97,500 AUD (maximum salary). It should be noted that the given figure is not the legally mandated minimum wage; rather, it represents the lowest figure reported in a salary survey that included thousands of participants and professionals from all regions of the country.
Median Salary
With a median salary of 58,100 AUD, half of the professionals who work as CNC Programmer in Australia earn less than this amount, and the other half earn more. The median salary denotes the middle value of salaries. Ideally, you would want to belong to the group earning more than the median salary, located on the right side of the salary distribution graph.
Percentiles and Salary Scale
The median is closely associated with two other values known as the 25th and 75th percentiles. By examining the salary distribution chart, it can be determined that 25% of professionals employed as CNC Programmer in Australia earn less than 48,000 AUD, while 75% earn more. Similarly, the chart shows that 75% earn less than 66,100 AUD while 25% earn more.
Pay Scale Structure
To provide a better understanding of expected salaries, we categorized the frequently occurring salaries into different ranges. This approach provides a more precise representation of salary distribution for the job title CNC Programmer in Australia compared to simply calculating the average. The majority of reported salaries, approximately 65%, fall within the range of 37,200 AUD to 51,400 AUD. About 20% of salaries are below the 37,200 AUD mark, while 10% fall within the range of 51,400 AUD to 57,800 AUD. Only 5% of individuals have salaries exceeding 57,800 AUD.
Salary Comparison by Years of Experience / CNC Programmer / Australia
How do experience and age affect pay?
| 0 - 2 Years | 36,200 AUD | |
| 2 - 5 Years | +31% | 47,300 AUD |
| 5 - 10 Years | +40% | 66,200 AUD |
| 10 - 15 Years | +20% | 79,600 AUD |
| 15 - 20 Years | +9% | 86,400 AUD |
| 20+ Years | +8% | 93,300 AUD |
The experience level is the most important factor in determining the salary. Naturally, the more years of experience the higher the wage. We broke down salaries by experience level for people working as CNC Programmer and this is what we found.
Employees with less than two years of experience earn approximately 36,200 AUD.
While someone with an experience level between two and five years is expected to earn 47,300 AUD, 31% more than someone with less than two year's experience.
Moving forward, an experience level between five and ten years lands a salary of 66,200 AUD, 40% more than someone with two to five years of experience.
Additionally, professionals whose expertise span anywhere between ten and fifteen years get a salary equivalent to 79,600 AUD, 20% more than someone with five to ten years of experience.
If the experience level is between fifteen and twenty years, then the expected wage is 86,400 AUD, 9% more than someone with ten to fifteen years of experience.
Lastly, employees with more than twenty years of professional experience get a salary of 93,300 AUD, 8% more than people with fifteen to twenty years of experience.
Typical Salary Progress for Most Careers
Salary Comparison By Education / CNC Programmer / Australia
How do education levels affect salaries?
Displayed below is the average salary variance between different education levels of professionals working as CNC Programmer.
| Certificate or Diploma | 42,700 AUD | |
| Bachelor's Degree | +81% | 77,300 AUD |
We all know that higher education equals a bigger salary, but how much more money can a degree add to your income? We broke down salaries by education level for the position CNC Programmer in order to make a comparison.
Level 1: Certificate or Diploma
Employees at this education level have an average salary of 42,700 AUD.
Level 2: Bachelor's Degree
At this level, the average salary becomes 77,300 AUD, 81% more than the previous level.
Typical Salary Difference by Education for Most Careers
Salary and Compensation Comparison By Gender / CNC Programmer / Australia
Though gender should not have an effect on pay, in reality, it does. So who gets paid more: men or women? For the people who work as CNC Programmer in Australia, the average difference between the salary of male and female employees is 6%.
| Male | 65,300 AUD | |
| Female | -6% | 61,500 AUD |
Salary Comparison By Gender in Australia for all Careers
Average Annual Salary Increment Percentage / CNC Programmer / Australia
How much are annual salary increments in Australia for individuals working as CNC Programmer? How often do employees get salary raises?
Individuals working as CNC Programmer in Australia are likely to observe a salary increase of approximately 9% every 17 months. The national average annual increment for all professions combined is 8% granted to employees every 16 months.
Australia / All Professions
The term Annual Salary Increase usually refers to the increase in 12 calendar month period, but because it is rare that people get their salaries reviewed exactly on the one-year mark, it is more meaningful to know the frequency and the rate at the time of the increase.
How to calculate the salary increment percentage?
The annual salary Increase in a calendar year (12 months) can be easily calculated as follows: Annual Salary Increase = Increase Rate x 12 / Increase Frequency
Worldwide Salary Raises: All Countries and All Jobs
Salary Packages and Schemes
Not all compensation increases are reflected directly in the salary. Some companies offer upgraded packages to their staff instead of cash money. The figures displayed here account only for direct increments to the base salary.
Bonus and Incentive Rates / CNC Programmer / Australia
How much and how often are bonuses being awarded?
Share This Chart Tweet Get Chart Linkhttp://www.salaryexplorer.com/charts/australia/factory-and-manufacturing/cnc-programmer/annual-salary-bonus-rate-australia-cnc-programmer.jpg
70% of surveyed staff reported that they haven't received any bonuses or incentives in the previous year while 30% said that they received at least one form of monetary bonus.
Those who got bonuses reported rates ranging from 1% to 3% of their annual salary.
| Received Bonus | 30% | |
| No Bonus | 70% |
Types of Bonuses Considered
Individual Performance-Based BonusesThe most standard form of bonus, where the employee is awarded based on their exceptional performance.
Company Performance BonusesOccasionally, some companies like to celebrate excess earnings and profits with their staff collectively in the form of bonuses that are granted to everyone. The amount of the bonus will probably be different from person to person depending on their role within the organization.
Goal-Based BonusesGranted upon achieving an important goal or milestone.
Holiday / End of Year BonusesThese types of bonuses are given without a reason and usually resemble an appreciation token.
Bonuses Are Not Commissions!
People tend to confuse bonuses with commissions. A commission is a prefixed rate at which someone gets paid for items sold or deals completed while a bonus is in most cases arbitrary and unplanned.
What makes a position worthy of good bonuses and a high salary?
The main two types of jobs | |
| Revenue Generators | Supporting Cast |
Employees that are directly involved in generating revenue or profit for the organization. Their field of expertise usually matches the type of business. | Employees that support and facilitate the work of revenue generators. Their expertise is usually different from that of the core business operations. |
Example: | Example: |
Revenue generators usually get more and higher bonuses, higher salaries, and more frequent salary increments. The reason is quite simple: it is easier to quantify your value to the company in monetary terms when you participate in revenue generation.
Bonus Comparison by Seniority Level
Top management personnel and senior employees naturally exhibit higher bonus rates and frequencies than juniors. This is very predictable due to the inherent responsibilities of being higher in the hierarchy. People in top positions can easily get double or triple bonus rates than employees down the pyramid.
Average Hourly Wage / CNC Programmer / Australia
30 AUD per hourThe average hourly wage (pay per hour) for individuals working as CNC Programmer in Australia is 30 AUD.This is the rate they get paid for every worked hour.
About The Hourly Pay Rate
The hourly wage is the salary paid in one worked hour. Usually, jobs are classified into two categories: salaried jobs and hourly jobs. Salaried jobs pay a fixed amount regardless of the hours worked. Hourly jobs pay per worked hour. To convert salary into hourly wage the above formula is used (assuming 5 working days in a week and 8 working hours per day which is the standard for most jobs). The hourly wage calculation may differ slightly depending on the worked hours per week and the annual vacation allowance. The figures mentioned above are good approximations and are considered to be the standard. One major difference between salaried employees and hourly paid employees is overtime eligibility. Salaried employees are usually exempt from overtime as opposed to hourly paid staff.
What is the minimum hourly rate of pay?
The minimum pay rate per hour for people working as CNC Programmer in Australia is 16 AUD. This is the minimum as per the gathered data in the salary survey not the minimum hourly rate mandated by law.
Salary comparison with similar jobs
| Job Title | Average Salary |
| Factory and Manufacturing |  -100% | |
| 3D Printing Technician | 57,600 AUD | -9% |
| Additive Manufacturing Engineer | 79,400 AUD |  +25% |
| Assembly Foreman | 25,400 AUD | -60% |
| Assembly Line Worker | 25,200 AUD | -60% |
| Assembly Supervisor | 38,900 AUD | -39% |
| Assistance Maintenance Manager | 98,300 AUD | +55% |
| Assistant Shipping Manager | 85,500 AUD | +35% |
| Automation Process Analyst | 58,800 AUD | -7% |
| Chemical Equipment Controller | 61,000 AUD | -4% |
| Chemical Technican Apprentice | 52,500 AUD | -17% |
| CNC Machinist | 58,200 AUD | -8% |
| CNC Operator | 56,200 AUD | -11% |
| CNC Programmer | 63,300 AUD | -0% |
| Colour Technologist | 32,500 AUD | -49% |
| Contracts Manager | 114,000 AUD | +80% |
| Data Collection Coordinator | 41,700 AUD | -34% |
| Demand Planner | 38,800 AUD | -39% |
| Derrick Operator | 26,100 AUD | -59% |
| Digital Twin Engineer | 78,600 AUD | +24% |
| Director of Manufacturing | 153,000 AUD | +140% |
| Dock Worker | 24,700 AUD | -61% |
| Drying Technician | 26,200 AUD | -59% |
| Equipment Operator | 24,900 AUD | -61% |
| Export Sales Coordinator | 77,900 AUD | +23% |
| Factory Superintendent | 42,000 AUD | -34% |
| Factory Worker | 27,600 AUD | -56% |
| Failure Analysis Technician | 40,500 AUD | -36% |
| Fiberglass Laminator | 28,300 AUD | -55% |
| Food Technologist | 47,200 AUD | -25% |
| Forklift Driver | 25,500 AUD | -60% |
| Forklift Operator | 27,600 AUD | -56% |
| Forming Machine Operator | 27,200 AUD | -57% |
| Furnace Operator | 25,900 AUD | -59% |
| Gas Appliance Repairer | 27,700 AUD | -56% |
| General Warehouse Associate | 45,900 AUD | -28% |
| Green Product Designer | 77,700 AUD | +23% |
| Heavy Equipment Operator | 34,500 AUD | -46% |
| HSE Manager | 110,000 AUD | +74% |
| Industrial Cybersecurity Specialist | 81,300 AUD | +28% |
| Industrial Engineer | 85,900 AUD | +36% |
| Industrial Machinery Mechanic | 54,300 AUD | -14% |
| Industrial Production Manager | 156,000 AUD | +150% |
| Industrial Safety and Health Engineer | 86,400 AUD | +36% |
| Intake Operator | 35,800 AUD | -43% |
| Key Account Manager | 122,000 AUD | +93% |
| Lean Manufacturing Specialist | 86,900 AUD | +37% |
| Lift Truck Operator | 27,500 AUD | -57% |
| Loading Supervisor | 47,100 AUD | -26% |
| Logistic Coordinator | 68,800 AUD | +9% |
| Logistics Clerk | 33,600 AUD | -47% |
| Machine Operator | 24,800 AUD | -61% |
| Machinist | 26,700 AUD | -58% |
| Maintenance Manager | 104,000 AUD | +64% |
| Maintenance Store Clerk | 29,100 AUD | -54% |
| Manufacturing Engineer | 84,100 AUD | +33% |
| Manufacturing Engineering Manager | 122,000 AUD | +93% |
| Manufacturing Engineering Technologist | 97,400 AUD | +54% |
| Manufacturing Manager | 149,000 AUD | +140% |
| Manufacturing Operative | 44,000 AUD | -31% |
| Manufacturing Production Technician | 35,100 AUD | -45% |
| Manufacturing Supervisor | 74,900 AUD | +18% |
| Manufacturing Technician | 30,300 AUD | -52% |
| Materials Manager | 113,000 AUD | +78% |
| Materials Supervisor | 77,500 AUD | +22% |
| Mechanical Fitter Engineer | 89,500 AUD | +41% |
| Mechanical Foreman | 24,900 AUD | -61% |
| Merchandise Planner | 44,400 AUD | -30% |
| Metrology Engineer | 76,500 AUD | +21% |
| Operations Engineer | 79,100 AUD | +25% |
| Operations Manager | 137,000 AUD | +120% |
| Order Management Coordinator | 66,100 AUD | +4% |
| Order Processing Manager | 113,000 AUD | +78% |
| Order Selector | 33,100 AUD | -48% |
| Package Handler | 24,000 AUD | -62% |
| Packaging Manager | 83,400 AUD | +32% |
| Packer | 25,700 AUD | -59% |
| Packing Deputy Supervisor | 67,100 AUD | +6% |
| Planning Manager | 124,000 AUD | +96% |
| Plant Manager | 134,000 AUD | +110% |
| Precision Instrument Repairer | 38,500 AUD | -39% |
| Predictive Maintenance Analyst | 81,700 AUD | +29% |
| Process Technician | 32,300 AUD | -49% |
| Product Manager | 136,000 AUD | +110% |
| Production Analyst | 112,000 AUD | +77% |
| Production Director | 163,000 AUD | +160% |
| Production Engineer | 82,400 AUD | +30% |
| Production Engineering Supervisor | 122,000 AUD | +93% |
| Production Inspector | 94,100 AUD | +49% |
| Production Laborer | 24,900 AUD | -61% |
| Production Manager | 151,000 AUD | +140% |
| Production Operator | 36,600 AUD | -42% |
| Production Scheduler | 66,400 AUD | +5% |
| Production Supervisor | 86,600 AUD | +37% |
| Production Technician | 38,000 AUD | -40% |
| Production Worker | 34,100 AUD | -46% |
| Quality Control Analyst | 109,000 AUD | +72% |
| Quality Control Inspector | 90,200 AUD | +42% |
| Quality Control Manager | 123,000 AUD | +94% |
| Service Technician | 33,700 AUD | -47% |
| SHEQ Officer | 39,000 AUD | -38% |
| Shipping Manager | 133,000 AUD | +110% |
| Small Engine Mechanic | 44,400 AUD | -30% |
| Smart Factory Consultant | 103,000 AUD | +63% |
| Spray Painter | 25,800 AUD | -59% |
| Sterile Processing Technician | 30,300 AUD | -52% |
| Structural Welder | 24,000 AUD | -62% |
| Supply Chain Operative | 71,200 AUD | +12% |
| Sustainable Manufacturing Specialist | 108,000 AUD | +71% |
| Technical Operator | 35,500 AUD | -44% |
| Technology Development Manager | 141,000 AUD | +120% |
| Testing Technician | 62,300 AUD | -2% |
| Toolmaker | 41,100 AUD | -35% |
| Warehouse Forklift Operator | 27,300 AUD | -57% |
| Warehouse Operative | 27,700 AUD | -56% |
| Warehouse Worker | 28,000 AUD | -56% |
| Warranty Handler | 49,800 AUD | -21% |
| Welder | 25,200 AUD | -60% |
| Workshop Manager | 94,700 AUD | +50% |
Government vs Private Sector Salary Comparison
Where can you get paid more, working in a private company or the government? The difference between the public or government sector salaries and the private sector salaries in Australia is 5% on average across all career fields.
| Private Sector | 89,000 AUD | |
| Public Sector | +5% | 93,400 AUD |
Salary Statistics and Calculation Guide
What is considered to be a good and competitive salary for the job title CNC Programmer in Australia?
A good and competitive compensation would range anywhere between 58,100 AUD and 66,100 AUD. This is a very rough estimate. Experience and education play a very huge part in the final earnings.
Gross Salary (before tax) and Net Salary (after tax)
All salary and compensation figures displayed here are gross salary figures, that is the salary before tax deductions. Because taxes may differ across sectors and locations, it is difficult to accurately calculate the net salary after tax for every career.
Base / Basic Salary
The base salary for a careers like CNC Programmer in Australia ranges from 32,300 AUD to 48,000 AUD. The base salary depends on many factors including experience and education. It is not easy to provide a figure with very little information, so take this range with a grain of salt.
What is the difference between the median and the average salary?
Both are indicators. If your salary is higher than both the average and the median then you are doing very well. If your salary is lower than both, then many people earn more than you and there is plenty of room for improvement. If your wage is between the average and the median, then things can be a bit complicated. We wrote a guide to explain all about the different scenarios. How to compare your salary
