Sheet Metal Mechanic Average Salary in Dortmund 2024
How much money does a person working as Sheet Metal Mechanic make in Dortmund?
LOW
620
EUR AVERAGE
1,160
EUR HIGH
1,770
EUR
A person working as Sheet Metal Mechanic in Dortmund typically earns around 1,160 EUR. Salaries range from 620 EUR (lowest) to 1,770 EUR (highest).
Salary Variance
This is the average salary including housing, transport, and other benefits. Sheet Metal Mechanic salaries in Dortmund vary drastically based on experience, skills, gender, or location. Below you will find a detailed breakdown based on many different criteria.
Sheet Metal Mechanic Pay Scale and Salaries in Dortmund
Salary Structure and Pay Scale Comparison
1,040 EUR or more
930 to 1,040 EUR
690 EUR or less
690 to 930 EUR
 620 EUR |
1,050 EUR |
1,770 EUR |
Median Salary, maximum and minimum salary, minimum wage, starting salary, and the salary range
Salary Range, Minimum Wage, and Starting Salary
Salaries for the position Sheet Metal Mechanic in Dortmund range from 620 EUR (starting salary) to 1,770 EUR (maximum salary). It should be noted that the given figure is not the legally mandated minimum wage; rather, it represents the lowest figure reported in a salary survey that included thousands of participants and professionals from all regions of the country.
Median Salary
With a median salary of 1,050 EUR, half of the professionals who work as Sheet Metal Mechanic in Dortmund earn less than this amount, and the other half earn more. The median salary denotes the middle value of salaries. Ideally, you would want to belong to the group earning more than the median salary, located on the right side of the salary distribution graph.
Percentiles and Salary Scale
The median is closely associated with two other values known as the 25th and 75th percentiles. By examining the salary distribution chart, it can be determined that 25% of professionals employed as Sheet Metal Mechanic in Dortmund earn less than 870 EUR, while 75% earn more. Similarly, the chart shows that 75% earn less than 1,190 EUR while 25% earn more.
Pay Scale Structure
To provide a better understanding of expected salaries, we categorized the frequently occurring salaries into different ranges. This approach provides a more precise representation of salary distribution for the job title Sheet Metal Mechanic in Dortmund compared to simply calculating the average. The majority of reported salaries, approximately 65%, fall within the range of 690 EUR to 930 EUR. About 20% of salaries are below the 690 EUR mark, while 10% fall within the range of 930 EUR to 1,040 EUR. Only 5% of individuals have salaries exceeding 1,040 EUR.
Salary Comparison by Years of Experience / Sheet Metal Mechanic / Dortmund
How do experience and age affect pay?
| 0 - 2 Years | 710 EUR | |
| 2 - 5 Years | +23% | 870 EUR |
| 5 - 10 Years | +42% | 1,230 EUR |
| 10 - 15 Years | +17% | 1,440 EUR |
| 15 - 20 Years | +10% | 1,580 EUR |
| 20+ Years | +6% | 1,670 EUR |
The experience level is the most important factor in determining the salary. Naturally, the more years of experience the higher the wage. We broke down salaries by experience level for people working as Sheet Metal Mechanic and this is what we found.
Employees with less than two years of experience earn approximately 710 EUR.
While someone with an experience level between two and five years is expected to earn 870 EUR, 23% more than someone with less than two year's experience.
Moving forward, an experience level between five and ten years lands a salary of 1,230 EUR, 42% more than someone with two to five years of experience.
Additionally, professionals whose expertise span anywhere between ten and fifteen years get a salary equivalent to 1,440 EUR, 17% more than someone with five to ten years of experience.
If the experience level is between fifteen and twenty years, then the expected wage is 1,580 EUR, 10% more than someone with ten to fifteen years of experience.
Lastly, employees with more than twenty years of professional experience get a salary of 1,670 EUR, 6% more than people with fifteen to twenty years of experience.
Typical Salary Progress for Most Careers
Salary Comparison By Education / Sheet Metal Mechanic / Dortmund
How do education levels affect salaries?
Displayed below is the average salary variance between different education levels of professionals working as Sheet Metal Mechanic.
| High School | 870 EUR | |
| Certificate or Diploma | +40% | 1,210 EUR |
| Bachelor's Degree | +42% | 1,720 EUR |
We all know that higher education equals a bigger salary, but how much more money can a degree add to your income? We broke down salaries by education level for the position Sheet Metal Mechanic in order to make a comparison.
Level 1: High School
Employees at this education level have an average salary of 870 EUR.
Level 2: Certificate or Diploma
At this level, the average salary becomes 1,210 EUR, 40% more than the previous level.
Level 3: Bachelor's Degree
At this level, the average salary becomes 1,720 EUR, 42% more than the previous level.
Typical Salary Difference by Education for Most Careers
Salary and Compensation Comparison By Gender / Sheet Metal Mechanic / Dortmund
Though gender should not have an effect on pay, in reality, it does. So who gets paid more: men or women? For the people who work as Sheet Metal Mechanic in Germany, the average difference between the salary of male and female employees is 6%.
| Male | 1,170 EUR | |
| Female | -6% | 1,100 EUR |
Salary Comparison By Gender in Germany for all Careers
Average Annual Salary Increment Percentage / Sheet Metal Mechanic / Dortmund
How much are annual salary increments in Dortmund for individuals working as Sheet Metal Mechanic? How often do employees get salary raises?
Individuals working as Sheet Metal Mechanic in Germany are likely to observe a salary increase of approximately % every months. The national average annual increment for all professions combined is 8% granted to employees every 16 months.
Germany / All Professions
The term Annual Salary Increase usually refers to the increase in 12 calendar month period, but because it is rare that people get their salaries reviewed exactly on the one-year mark, it is more meaningful to know the frequency and the rate at the time of the increase.
How to calculate the salary increment percentage?
The annual salary Increase in a calendar year (12 months) can be easily calculated as follows: Annual Salary Increase = Increase Rate x 12 / Increase Frequency
Worldwide Salary Raises: All Countries and All Jobs
Salary Packages and Schemes
Not all compensation increases are reflected directly in the salary. Some companies offer upgraded packages to their staff instead of cash money. The figures displayed here account only for direct increments to the base salary.
Bonus and Incentive Rates / Sheet Metal Mechanic / Germany
How much and how often are bonuses being awarded?
Share This Chart Tweet Get Chart Linkhttp://www.salaryexplorer.com/charts/germany/construction-building-installation/sheet-metal-mechanic/annual-salary-bonus-rate-germany-sheet-metal-mechanic.jpg
100% of surveyed staff reported that they haven't received any bonuses or incentives in the previous year while % said that they received at least one form of monetary bonus.
Those who got bonuses reported rates ranging from % to % of their annual salary.
| Received Bonus | % | |
| No Bonus | 100% |
Types of Bonuses Considered
Individual Performance-Based BonusesThe most standard form of bonus, where the employee is awarded based on their exceptional performance.
Company Performance BonusesOccasionally, some companies like to celebrate excess earnings and profits with their staff collectively in the form of bonuses that are granted to everyone. The amount of the bonus will probably be different from person to person depending on their role within the organization.
Goal-Based BonusesGranted upon achieving an important goal or milestone.
Holiday / End of Year BonusesThese types of bonuses are given without a reason and usually resemble an appreciation token.
Bonuses Are Not Commissions!
People tend to confuse bonuses with commissions. A commission is a prefixed rate at which someone gets paid for items sold or deals completed while a bonus is in most cases arbitrary and unplanned.
What makes a position worthy of good bonuses and a high salary?
The main two types of jobs | |
| Revenue Generators | Supporting Cast |
Employees that are directly involved in generating revenue or profit for the organization. Their field of expertise usually matches the type of business. | Employees that support and facilitate the work of revenue generators. Their expertise is usually different from that of the core business operations. |
Example: | Example: |
Revenue generators usually get more and higher bonuses, higher salaries, and more frequent salary increments. The reason is quite simple: it is easier to quantify your value to the company in monetary terms when you participate in revenue generation.
Bonus Comparison by Seniority Level
Top management personnel and senior employees naturally exhibit higher bonus rates and frequencies than juniors. This is very predictable due to the inherent responsibilities of being higher in the hierarchy. People in top positions can easily get double or triple bonus rates than employees down the pyramid.
Average Hourly Wage / Sheet Metal Mechanic / Dortmund
7 EUR per hourThe average hourly wage (pay per hour) for individuals working as Sheet Metal Mechanic in Dortmund is 7 EUR.This is the rate they get paid for every worked hour.
About The Hourly Pay Rate
The hourly wage is the salary paid in one worked hour. Usually, jobs are classified into two categories: salaried jobs and hourly jobs. Salaried jobs pay a fixed amount regardless of the hours worked. Hourly jobs pay per worked hour. To convert salary into hourly wage the above formula is used (assuming 5 working days in a week and 8 working hours per day which is the standard for most jobs). The hourly wage calculation may differ slightly depending on the worked hours per week and the annual vacation allowance. The figures mentioned above are good approximations and are considered to be the standard. One major difference between salaried employees and hourly paid employees is overtime eligibility. Salaried employees are usually exempt from overtime as opposed to hourly paid staff.
What is the minimum hourly rate of pay?
The minimum pay rate per hour for people working as Sheet Metal Mechanic in Dortmund is 4 EUR. This is the minimum as per the gathered data in the salary survey not the minimum hourly rate mandated by law.
Salary comparison with similar jobs
| Job Title | Average Salary |
| Construction / Building / Installation |  -100% | |
| 3D Printing Construction Technician | 2,380 EUR |  +100% |
| Adjudicator | 1,360 EUR | +17% |
| Assembler | 1,150 EUR | -1% |
| Boat Builder and Shipwright | 1,630 EUR | +40% |
| Bricklayer | 920 EUR | -21% |
| Building Administrator | 1,490 EUR | +28% |
| Building Automation Engineer | 3,250 EUR | +180% |
| Building Contracts Manager | 4,950 EUR | +330% |
| Building Information Modeling Manager | 4,260 EUR | +270% |
| Building Inspector | 1,370 EUR | +18% |
| Building Monitor | 1,060 EUR | -9% |
| Building Sales Manager | 4,770 EUR | +310% |
| Building Systems Integration Specialist | 3,000 EUR | +160% |
| Cabinetmaker | 1,240 EUR | +7% |
| Carpenter | 1,350 EUR | +16% |
| Civil Engineer | 3,310 EUR | +180% |
| Civil Technician | 1,650 EUR | +42% |
| Concreter | 1,030 EUR | -11% |
| Construction and Building Inspector | 1,340 EUR | +15% |
| Construction and Maintenance Manager | 2,720 EUR | +130% |
| Construction Assistant | 1,300 EUR | +12% |
| Construction Coordinator | 1,840 EUR | +58% |
| Construction Data Analyst | 3,000 EUR | +160% |
| Construction Estimator | 2,020 EUR | +74% |
| Construction Field Engineer | 2,780 EUR | +140% |
| Construction General Manager | 6,290 EUR | +440% |
| Construction Inventory Officer | 1,140 EUR | -2% |
| Construction Manager | 6,330 EUR | +440% |
| Construction Operations Manager | 5,510 EUR | +370% |
| Construction Project Controls Manager | 4,550 EUR | +290% |
| Construction Project Coordinator | 3,270 EUR | +180% |
| Construction Project Engineer | 3,390 EUR | +190% |
| Construction Project Manager | 5,830 EUR | +400% |
| Construction Project Planner | 3,090 EUR | +170% |
| Construction Quality Control Manager | 4,300 EUR | +270% |
| Construction Robotics Engineer | 3,470 EUR | +200% |
| Construction Safety Officer | 2,020 EUR | +74% |
| Construction Superintendent | 2,120 EUR | +82% |
| Construction Supervisor | 3,210 EUR | +180% |
| Construction Technical Assistant | 1,250 EUR | +8% |
| Construction Technical Officer | 1,490 EUR | +28% |
| Construction Technical Writer | 1,260 EUR | +8% |
| Construction Technician | 1,200 EUR | +3% |
| Construction Waste Management Consultant | 3,240 EUR | +180% |
| Construction Worker | 1,040 EUR | -10% |
| Crane and Tower Operator | 1,200 EUR | +3% |
| Crane Operator | 1,130 EUR | -3% |
| Diesel Mechanic | 1,100 EUR | -5% |
| Digital Construction Manager | 3,680 EUR | +220% |
| Draughtsman | 1,030 EUR | -11% |
| Drywall Installer | 1,160 EUR | -0% |
| Electrical Draftsman | 1,170 EUR | +1% |
| Electrical Engineering Supervisor | 3,700 EUR | +220% |
| Electrical Engineering Technician | 1,480 EUR | +27% |
| Electrical Supervisor | 2,290 EUR | +97% |
| Electrician | 1,690 EUR | +45% |
| Elevator Installer and Repairer | 1,410 EUR | +21% |
| Engineer | 3,230 EUR | +180% |
| Excavator Operator | 1,170 EUR | +1% |
| Field Inspector | 1,910 EUR | +64% |
| Floor Finisher | 1,320 EUR | +14% |
| Floor Manager | 1,870 EUR | +61% |
| Foreman | 980 EUR | -16% |
| Frame and Truss Detailer | 1,020 EUR | -12% |
| Furniture Finisher | 1,130 EUR | -3% |
| Gas Technician | 1,050 EUR | -10% |
| Handyman | 960 EUR | -17% |
| Health and Safety Coordinator | 1,350 EUR | +16% |
| Health and Safety Officer | 1,570 EUR | +35% |
| Installation Manager | 3,860 EUR | +230% |
| Installer | 960 EUR | -17% |
| Insulation Installer | 1,110 EUR | -4% |
| Labourer | 890 EUR | -23% |
| Land Surveyor | 1,460 EUR | +26% |
| Lean Construction Specialist | 3,070 EUR | +160% |
| Lift Technician | 1,140 EUR | -2% |
| Maintenance Foreman | 970 EUR | -17% |
| Material Tester | 1,740 EUR | +50% |
| Model Maker | 1,630 EUR | +40% |
| Order Picker | 1,020 EUR | -12% |
| Painter | 1,050 EUR | -10% |
| Pipe Layer | 890 EUR | -23% |
| Pipe Welder | 920 EUR | -21% |
| Pipefitter | 970 EUR | -17% |
| Plumber | 1,250 EUR | +8% |
| Prefabrication and Modular Construction Specialist | 3,070 EUR | +160% |
| Property Coordinator | 2,660 EUR | +130% |
| Purchasing Manager | 3,920 EUR | +240% |
| Quantity Estimator | 2,180 EUR | +88% |
| Quantity Surveyor | 2,060 EUR | +77% |
| Roof Slater and Tiler | 970 EUR | -17% |
| Sheet Metal Mechanic | 1,160 EUR | -0% |
| Sheet Metal Worker | 990 EUR | -15% |
| Site Clerk | 1,140 EUR | -2% |
| Site engineer | 3,000 EUR | +160% |
| Site Leader | 5,380 EUR | +360% |
| Stock Controller | 1,590 EUR | +37% |
| Structural Steel Construction Worker | 1,240 EUR | +7% |
| Sustainable Materials Engineer | 3,130 EUR | +170% |
| Technical Draughtsman | 1,320 EUR | +14% |
| Tender Manager | 4,730 EUR | +310% |
| Tendering Manager | 4,840 EUR | +320% |
| Tower Crane Operator | 1,110 EUR | -4% |
| Wall and Floor Tiler | 1,060 EUR | -9% |
| Warehouse Manager | 3,670 EUR | +220% |
| Welder | 930 EUR | -20% |
| Welding Superintendent | 1,300 EUR | +12% |
Salary Comparison By City
| City | Average Salary |
| Berlin | 1,300 EUR |
| Dortmund | 1,160 EUR |
| Frankfurt | 1,180 EUR |
| Hamburg | 1,270 EUR |
| Munchen | 1,240 EUR |
| Stuttgart | 1,130 EUR |
Government vs Private Sector Salary Comparison
Where can you get paid more, working in a private company or the government? The difference between the public or government sector salaries and the private sector salaries in Germany is 5% on average across all career fields.
| Private Sector | 3,740 EUR | |
| Public Sector | +5% | 3,910 EUR |
Salary Statistics and Calculation Guide
What is considered to be a good and competitive salary for the job title Sheet Metal Mechanic in Dortmund?
A good and competitive compensation would range anywhere between 1,050 EUR and 1,190 EUR. This is a very rough estimate. Experience and education play a very huge part in the final earnings.
Gross Salary (before tax) and Net Salary (after tax)
All salary and compensation figures displayed here are gross salary figures, that is the salary before tax deductions. Because taxes may differ across sectors and locations, it is difficult to accurately calculate the net salary after tax for every career.
Base / Basic Salary
The base salary for a careers like Sheet Metal Mechanic in Dortmund ranges from 620 EUR to 870 EUR. The base salary depends on many factors including experience and education. It is not easy to provide a figure with very little information, so take this range with a grain of salt.
What is the difference between the median and the average salary?
Both are indicators. If your salary is higher than both the average and the median then you are doing very well. If your salary is lower than both, then many people earn more than you and there is plenty of room for improvement. If your wage is between the average and the median, then things can be a bit complicated. We wrote a guide to explain all about the different scenarios. How to compare your salary
