CNC Programmer Average Salary in Munchen 2024
How much money does a person working as CNC Programmer make in Munchen?
LOW
1,460
EUR AVERAGE
2,700
EUR HIGH
4,080
EUR
A person working as CNC Programmer in Munchen typically earns around 2,700 EUR. Salaries range from 1,460 EUR (lowest) to 4,080 EUR (highest).
Salary Variance
This is the average salary including housing, transport, and other benefits. CNC Programmer salaries in Munchen vary drastically based on experience, skills, gender, or location. Below you will find a detailed breakdown based on many different criteria.
CNC Programmer Pay Scale and Salaries in Munchen
Salary Structure and Pay Scale Comparison
2,410 EUR or more
2,150 to 2,410 EUR
1,600 EUR or less
1,600 to 2,150 EUR
 1,460 EUR |
2,410 EUR |
4,080 EUR |
Median Salary, maximum and minimum salary, minimum wage, starting salary, and the salary range
Salary Range, Minimum Wage, and Starting Salary
Salaries for the position CNC Programmer in Munchen range from 1,460 EUR (starting salary) to 4,080 EUR (maximum salary). It should be noted that the given figure is not the legally mandated minimum wage; rather, it represents the lowest figure reported in a salary survey that included thousands of participants and professionals from all regions of the country.
Median Salary
With a median salary of 2,410 EUR, half of the professionals who work as CNC Programmer in Munchen earn less than this amount, and the other half earn more. The median salary denotes the middle value of salaries. Ideally, you would want to belong to the group earning more than the median salary, located on the right side of the salary distribution graph.
Percentiles and Salary Scale
The median is closely associated with two other values known as the 25th and 75th percentiles. By examining the salary distribution chart, it can be determined that 25% of professionals employed as CNC Programmer in Munchen earn less than 2,020 EUR, while 75% earn more. Similarly, the chart shows that 75% earn less than 2,730 EUR while 25% earn more.
Pay Scale Structure
To provide a better understanding of expected salaries, we categorized the frequently occurring salaries into different ranges. This approach provides a more precise representation of salary distribution for the job title CNC Programmer in Munchen compared to simply calculating the average. The majority of reported salaries, approximately 65%, fall within the range of 1,600 EUR to 2,150 EUR. About 20% of salaries are below the 1,600 EUR mark, while 10% fall within the range of 2,150 EUR to 2,410 EUR. Only 5% of individuals have salaries exceeding 2,410 EUR.
Salary Comparison by Years of Experience / CNC Programmer / Munchen
How do experience and age affect pay?
| 0 - 2 Years | 1,690 EUR | |
| 2 - 5 Years | +26% | 2,140 EUR |
| 5 - 10 Years | +32% | 2,820 EUR |
| 10 - 15 Years | +18% | 3,320 EUR |
| 15 - 20 Years | +11% | 3,670 EUR |
| 20+ Years | +6% | 3,910 EUR |
The experience level is the most important factor in determining the salary. Naturally, the more years of experience the higher the wage. We broke down salaries by experience level for people working as CNC Programmer and this is what we found.
Employees with less than two years of experience earn approximately 1,690 EUR.
While someone with an experience level between two and five years is expected to earn 2,140 EUR, 26% more than someone with less than two year's experience.
Moving forward, an experience level between five and ten years lands a salary of 2,820 EUR, 32% more than someone with two to five years of experience.
Additionally, professionals whose expertise span anywhere between ten and fifteen years get a salary equivalent to 3,320 EUR, 18% more than someone with five to ten years of experience.
If the experience level is between fifteen and twenty years, then the expected wage is 3,670 EUR, 11% more than someone with ten to fifteen years of experience.
Lastly, employees with more than twenty years of professional experience get a salary of 3,910 EUR, 6% more than people with fifteen to twenty years of experience.
Typical Salary Progress for Most Careers
Salary Comparison By Education / CNC Programmer / Munchen
How do education levels affect salaries?
Displayed below is the average salary variance between different education levels of professionals working as CNC Programmer.
| Certificate or Diploma | 2,350 EUR | |
| Bachelor's Degree | +49% | 3,500 EUR |
We all know that higher education equals a bigger salary, but how much more money can a degree add to your income? We broke down salaries by education level for the position CNC Programmer in order to make a comparison.
Level 1: Certificate or Diploma
Employees at this education level have an average salary of 2,350 EUR.
Level 2: Bachelor's Degree
At this level, the average salary becomes 3,500 EUR, 49% more than the previous level.
Typical Salary Difference by Education for Most Careers
Salary and Compensation Comparison By Gender / CNC Programmer / Munchen
Though gender should not have an effect on pay, in reality, it does. So who gets paid more: men or women? For the people who work as CNC Programmer in Germany, the average difference between the salary of male and female employees is 6%.
| Male | 2,580 EUR | |
| Female | -6% | 2,430 EUR |
Salary Comparison By Gender in Germany for all Careers
Average Annual Salary Increment Percentage / CNC Programmer / Munchen
How much are annual salary increments in Munchen for individuals working as CNC Programmer? How often do employees get salary raises?
Individuals working as CNC Programmer in Germany are likely to observe a salary increase of approximately % every months. The national average annual increment for all professions combined is 8% granted to employees every 16 months.
Germany / All Professions
The term Annual Salary Increase usually refers to the increase in 12 calendar month period, but because it is rare that people get their salaries reviewed exactly on the one-year mark, it is more meaningful to know the frequency and the rate at the time of the increase.
How to calculate the salary increment percentage?
The annual salary Increase in a calendar year (12 months) can be easily calculated as follows: Annual Salary Increase = Increase Rate x 12 / Increase Frequency
Worldwide Salary Raises: All Countries and All Jobs
Salary Packages and Schemes
Not all compensation increases are reflected directly in the salary. Some companies offer upgraded packages to their staff instead of cash money. The figures displayed here account only for direct increments to the base salary.
Bonus and Incentive Rates / CNC Programmer / Germany
How much and how often are bonuses being awarded?
Share This Chart Tweet Get Chart Linkhttp://www.salaryexplorer.com/charts/germany/factory-and-manufacturing/cnc-programmer/annual-salary-bonus-rate-germany-cnc-programmer.jpg
100% of surveyed staff reported that they haven't received any bonuses or incentives in the previous year while % said that they received at least one form of monetary bonus.
Those who got bonuses reported rates ranging from % to % of their annual salary.
| Received Bonus | % | |
| No Bonus | 100% |
Types of Bonuses Considered
Individual Performance-Based BonusesThe most standard form of bonus, where the employee is awarded based on their exceptional performance.
Company Performance BonusesOccasionally, some companies like to celebrate excess earnings and profits with their staff collectively in the form of bonuses that are granted to everyone. The amount of the bonus will probably be different from person to person depending on their role within the organization.
Goal-Based BonusesGranted upon achieving an important goal or milestone.
Holiday / End of Year BonusesThese types of bonuses are given without a reason and usually resemble an appreciation token.
Bonuses Are Not Commissions!
People tend to confuse bonuses with commissions. A commission is a prefixed rate at which someone gets paid for items sold or deals completed while a bonus is in most cases arbitrary and unplanned.
What makes a position worthy of good bonuses and a high salary?
The main two types of jobs | |
| Revenue Generators | Supporting Cast |
Employees that are directly involved in generating revenue or profit for the organization. Their field of expertise usually matches the type of business. | Employees that support and facilitate the work of revenue generators. Their expertise is usually different from that of the core business operations. |
Example: | Example: |
Revenue generators usually get more and higher bonuses, higher salaries, and more frequent salary increments. The reason is quite simple: it is easier to quantify your value to the company in monetary terms when you participate in revenue generation.
Bonus Comparison by Seniority Level
Top management personnel and senior employees naturally exhibit higher bonus rates and frequencies than juniors. This is very predictable due to the inherent responsibilities of being higher in the hierarchy. People in top positions can easily get double or triple bonus rates than employees down the pyramid.
Average Hourly Wage / CNC Programmer / Munchen
16 EUR per hourThe average hourly wage (pay per hour) for individuals working as CNC Programmer in Munchen is 16 EUR.This is the rate they get paid for every worked hour.
About The Hourly Pay Rate
The hourly wage is the salary paid in one worked hour. Usually, jobs are classified into two categories: salaried jobs and hourly jobs. Salaried jobs pay a fixed amount regardless of the hours worked. Hourly jobs pay per worked hour. To convert salary into hourly wage the above formula is used (assuming 5 working days in a week and 8 working hours per day which is the standard for most jobs). The hourly wage calculation may differ slightly depending on the worked hours per week and the annual vacation allowance. The figures mentioned above are good approximations and are considered to be the standard. One major difference between salaried employees and hourly paid employees is overtime eligibility. Salaried employees are usually exempt from overtime as opposed to hourly paid staff.
What is the minimum hourly rate of pay?
The minimum pay rate per hour for people working as CNC Programmer in Munchen is 8 EUR. This is the minimum as per the gathered data in the salary survey not the minimum hourly rate mandated by law.
Salary comparison with similar jobs
| Job Title | Average Salary |
| Factory and Manufacturing |  -100% | |
| 3D Printing Technician | 2,640 EUR | -2% |
| Additive Manufacturing Engineer | 3,340 EUR |  +24% |
| Assembly Foreman | 1,150 EUR | -57% |
| Assembly Line Worker | 1,110 EUR | -59% |
| Assembly Supervisor | 1,710 EUR | -37% |
| Assistance Maintenance Manager | 3,990 EUR | +48% |
| Assistant Shipping Manager | 3,490 EUR | +29% |
| Automation Process Analyst | 2,720 EUR | +1% |
| Chemical Equipment Controller | 2,730 EUR | +1% |
| Chemical Technican Apprentice | 2,210 EUR | -18% |
| CNC Machinist | 2,500 EUR | -7% |
| CNC Operator | 2,330 EUR | -14% |
| CNC Programmer | 2,700 EUR | -0% |
| Colour Technologist | 1,460 EUR | -46% |
| Contracts Manager | 4,560 EUR | +69% |
| Data Collection Coordinator | 1,830 EUR | -32% |
| Demand Planner | 1,720 EUR | -36% |
| Derrick Operator | 1,180 EUR | -56% |
| Digital Twin Engineer | 3,330 EUR | +23% |
| Director of Manufacturing | 6,680 EUR | +150% |
| Dock Worker | 1,070 EUR | -60% |
| Drying Technician | 1,070 EUR | -60% |
| Equipment Operator | 980 EUR | -64% |
| Export Sales Coordinator | 3,280 EUR | +21% |
| Factory Superintendent | 1,750 EUR | -35% |
| Factory Worker | 1,230 EUR | -54% |
| Failure Analysis Technician | 1,740 EUR | -36% |
| Fiberglass Laminator | 1,230 EUR | -54% |
| Food Technologist | 2,050 EUR | -24% |
| Forklift Driver | 1,170 EUR | -57% |
| Forklift Operator | 1,180 EUR | -56% |
| Forming Machine Operator | 1,230 EUR | -54% |
| Furnace Operator | 1,160 EUR | -57% |
| Gas Appliance Repairer | 1,130 EUR | -58% |
| General Warehouse Associate | 1,870 EUR | -31% |
| Green Product Designer | 3,140 EUR | +16% |
| Heavy Equipment Operator | 1,470 EUR | -46% |
| HSE Manager | 4,700 EUR | +74% |
| Industrial Cybersecurity Specialist | 3,680 EUR | +36% |
| Industrial Engineer | 3,660 EUR | +36% |
| Industrial Machinery Mechanic | 2,300 EUR | -15% |
| Industrial Production Manager | 6,430 EUR | +140% |
| Industrial Safety and Health Engineer | 3,450 EUR | +28% |
| Intake Operator | 1,500 EUR | -44% |
| Key Account Manager | 5,230 EUR | +94% |
| Lean Manufacturing Specialist | 3,620 EUR | +34% |
| Lift Truck Operator | 1,130 EUR | -58% |
| Loading Supervisor | 1,950 EUR | -28% |
| Logistic Coordinator | 2,780 EUR | +3% |
| Logistics Clerk | 1,440 EUR | -47% |
| Machine Operator | 1,170 EUR | -57% |
| Machinist | 1,150 EUR | -57% |
| Maintenance Manager | 4,350 EUR | +61% |
| Maintenance Store Clerk | 1,260 EUR | -53% |
| Manufacturing Engineer | 3,480 EUR | +29% |
| Manufacturing Engineering Manager | 5,530 EUR | +100% |
| Manufacturing Engineering Technologist | 4,260 EUR | +58% |
| Manufacturing Manager | 5,960 EUR | +120% |
| Manufacturing Operative | 1,880 EUR | -30% |
| Manufacturing Production Technician | 1,490 EUR | -45% |
| Manufacturing Supervisor | 3,230 EUR | +20% |
| Manufacturing Technician | 1,330 EUR | -51% |
| Materials Manager | 4,740 EUR | +75% |
| Materials Supervisor | 3,330 EUR | +23% |
| Mechanical Fitter Engineer | 3,670 EUR | +36% |
| Mechanical Foreman | 1,090 EUR | -60% |
| Merchandise Planner | 1,930 EUR | -29% |
| Metrology Engineer | 3,610 EUR | +34% |
| Operations Engineer | 3,360 EUR | +24% |
| Operations Manager | 5,670 EUR | +110% |
| Order Management Coordinator | 2,860 EUR | +6% |
| Order Processing Manager | 4,990 EUR | +85% |
| Order Selector | 1,410 EUR | -48% |
| Package Handler | 1,070 EUR | -60% |
| Packaging Manager | 3,660 EUR | +36% |
| Packer | 1,100 EUR | -59% |
| Packing Deputy Supervisor | 2,850 EUR | +6% |
| Planning Manager | 5,350 EUR | +98% |
| Plant Manager | 6,000 EUR | +120% |
| Precision Instrument Repairer | 1,780 EUR | -34% |
| Predictive Maintenance Analyst | 3,670 EUR | +36% |
| Process Technician | 1,480 EUR | -45% |
| Product Manager | 5,990 EUR | +120% |
| Production Analyst | 4,970 EUR | +84% |
| Production Director | 7,080 EUR | +160% |
| Production Engineer | 3,800 EUR | +41% |
| Production Engineering Supervisor | 5,460 EUR | +100% |
| Production Inspector | 3,930 EUR | +46% |
| Production Laborer | 1,010 EUR | -63% |
| Production Manager | 6,550 EUR | +140% |
| Production Operator | 1,560 EUR | -42% |
| Production Scheduler | 2,660 EUR | -2% |
| Production Supervisor | 3,470 EUR | +28% |
| Production Technician | 1,630 EUR | -40% |
| Production Worker | 1,480 EUR | -45% |
| Quality Control Analyst | 4,560 EUR | +69% |
| Quality Control Inspector | 3,930 EUR | +46% |
| Quality Control Manager | 5,520 EUR | +100% |
| Service Technician | 1,380 EUR | -49% |
| SHEQ Officer | 1,720 EUR | -36% |
| Shipping Manager | 5,720 EUR | +110% |
| Small Engine Mechanic | 1,910 EUR | -29% |
| Smart Factory Consultant | 4,330 EUR | +60% |
| Spray Painter | 1,170 EUR | -57% |
| Sterile Processing Technician | 1,290 EUR | -52% |
| Structural Welder | 1,060 EUR | -61% |
| Supply Chain Operative | 3,140 EUR | +16% |
| Sustainable Manufacturing Specialist | 4,980 EUR | +84% |
| Technical Operator | 1,560 EUR | -42% |
| Technology Development Manager | 6,570 EUR | +140% |
| Testing Technician | 2,630 EUR | -3% |
| Toolmaker | 1,870 EUR | -31% |
| Warehouse Forklift Operator | 1,170 EUR | -57% |
| Warehouse Operative | 1,260 EUR | -53% |
| Warehouse Worker | 1,240 EUR | -54% |
| Warranty Handler | 2,220 EUR | -18% |
| Welder | 1,070 EUR | -60% |
| Workshop Manager | 4,270 EUR | +58% |
Salary Comparison By City
| City | Average Salary |
| Berlin | 2,910 EUR |
| Dortmund | 2,410 EUR |
| Frankfurt | 2,500 EUR |
| Hamburg | 2,800 EUR |
| Munchen | 2,700 EUR |
| Stuttgart | 2,610 EUR |
Government vs Private Sector Salary Comparison
Where can you get paid more, working in a private company or the government? The difference between the public or government sector salaries and the private sector salaries in Germany is 5% on average across all career fields.
| Private Sector | 3,740 EUR | |
| Public Sector | +5% | 3,910 EUR |
Salary Statistics and Calculation Guide
What is considered to be a good and competitive salary for the job title CNC Programmer in Munchen?
A good and competitive compensation would range anywhere between 2,410 EUR and 2,730 EUR. This is a very rough estimate. Experience and education play a very huge part in the final earnings.
Gross Salary (before tax) and Net Salary (after tax)
All salary and compensation figures displayed here are gross salary figures, that is the salary before tax deductions. Because taxes may differ across sectors and locations, it is difficult to accurately calculate the net salary after tax for every career.
Base / Basic Salary
The base salary for a careers like CNC Programmer in Munchen ranges from 1,460 EUR to 2,020 EUR. The base salary depends on many factors including experience and education. It is not easy to provide a figure with very little information, so take this range with a grain of salt.
What is the difference between the median and the average salary?
Both are indicators. If your salary is higher than both the average and the median then you are doing very well. If your salary is lower than both, then many people earn more than you and there is plenty of room for improvement. If your wage is between the average and the median, then things can be a bit complicated. We wrote a guide to explain all about the different scenarios. How to compare your salary
